{"title":"Semi-Flush Mount Lights","description":"\u003cp\u003e\u003cstrong\u003eA semi-flush mount is the fixture most Canadian homes should have and almost none do.\u003c\/strong\u003e It hangs 4 to 12 inches below the ceiling on a short stem — just enough of a gap for light to escape upward as well as down.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the gap changes everything\u003c\/h2\u003e\n\n\u003cp\u003eA true flush mount sits tight against the ceiling. All its light goes downward, which leaves a bright disc directly overhead and shadowed corners everywhere else. \u003cstrong\u003eA semi-flush bounces light off the ceiling\u003c\/strong\u003e, and that reflected light fills the room evenly. Same bulb, same wattage, completely different result.\u003c\/p\u003e\n\n\u003cp\u003eIt also reads as a chosen object rather than a builder's default. A flush mount is what came with the house; a semi-flush is what you picked.\u003c\/p\u003e\n\n\u003ch2\u003eWill it fit your ceiling?\u003c\/h2\u003e\n\n\u003cp\u003eThe honest rule: \u003cstrong\u003e9-foot ceilings and up, semi-flush every time.\u003c\/strong\u003e At \u003cstrong\u003e8 feet\u003c\/strong\u003e, a semi-flush with a \u003cstrong\u003e4 to 6 inch drop\u003c\/strong\u003e works well in bedrooms, dining rooms and living rooms — anywhere people aren't walking directly beneath it at the edges of the room.\u003c\/p\u003e\n\n\u003cp\u003eWhere to be careful at 8 feet: hallways, stair landings and doorways. A 12-inch drop in a hallway puts the fixture at 7 feet, and tall people will notice. Measure the actual drop listed on the product page rather than assuming.\u003c\/p\u003e\n\n\u003ch2\u003eSizing\u003c\/h2\u003e\n\n\u003cp\u003eAdd the room's length and width in feet and use the sum as the diameter in inches — a 10 × 12 bedroom takes roughly a \u003cstrong\u003e22-inch fixture\u003c\/strong\u003e. Semi-flush mounts are the fixture people most often buy too small, because the drop makes them look larger in product photos than they do on a real ceiling.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation and wiring\u003c\/h2\u003e\n\n\u003cp\u003eSemi-flush mounts are hardwired and mount to a standard ceiling box. Swapping an existing fixture is a straightforward job with the breaker off. A new location, or a fixture heavier than your box is rated for, is electrician work.\u003c\/p\u003e\n\n\u003cp\u003eEvery fixture runs on \u003cstrong\u003e120V at 60Hz\u003c\/strong\u003e, standard Canadian residential supply — no adapter, no transformer. Bulbs are typically \u003cstrong\u003eE26\u003c\/strong\u003e, at \u003cstrong\u003e2700K to 3000K\u003c\/strong\u003e for bedrooms, hallways and living spaces.\u003c\/p\u003e\n\n\u003cp\u003eFrom a Canadian company that has lived under an 8-foot basement ceiling.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is a semi-flush mount light?\u003c\/h3\u003e\n\u003cp\u003eA ceiling fixture that hangs 4 to 12 inches below the ceiling on a short stem, rather than sitting directly against it. The gap lets light escape upward and reflect off the ceiling for more even room lighting.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use a semi-flush mount on an 8-foot ceiling?\u003c\/h3\u003e\n\u003cp\u003eYes, with a drop of 4 to 6 inches. Avoid longer drops at 8 feet in hallways, doorways and stair landings where people walk directly underneath.\u003c\/p\u003e\n\n\u003ch3\u003eSemi-flush vs flush mount — which is better?\u003c\/h3\u003e\n\u003cp\u003eSemi-flush gives noticeably better light quality because it illuminates the ceiling as well as the room. Flush mount is the right choice only when clearance is genuinely tight — under 8 feet, or in a hallway.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size semi-flush mount do I need?\u003c\/h3\u003e\n\u003cp\u003eAdd the room's length and width in feet and use that number as the diameter in inches. A 10 × 12 room takes about 22 inches.\u003c\/p\u003e\n\n\u003ch3\u003eDo these work with Canadian wiring?\u003c\/h3\u003e\n\u003cp\u003eYes. All fixtures are built for 120V\/60Hz standard Canadian residential supply.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is a semi-flush mount light?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A ceiling fixture that hangs 4 to 12 inches below the ceiling on a short stem, rather than sitting directly against it. The gap lets light escape upward and reflect off the ceiling for more even room lighting.\"}},{\"@type\":\"Question\",\"name\":\"Can I use a semi-flush mount on an 8-foot ceiling?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, with a drop of 4 to 6 inches. Avoid longer drops at 8 feet in hallways, doorways and stair landings where people walk directly underneath.\"}},{\"@type\":\"Question\",\"name\":\"Semi-flush vs flush mount, which is better?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Semi-flush gives noticeably better light quality because it illuminates the ceiling as well as the room. Flush mount is the right choice only when clearance is genuinely tight.\"}},{\"@type\":\"Question\",\"name\":\"What size semi-flush mount do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Add the room's length and width in feet and use that number as the diameter in inches. A 10 by 12 room takes about 22 inches.\"}},{\"@type\":\"Question\",\"name\":\"Do these work with Canadian wiring?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. All fixtures are built for 120V\/60Hz standard Canadian residential supply.\"}}]}\n\u003c\/script\u003e","products":[],"url":"https:\/\/maisonmonashee.com\/collections\/semi-flush-mount-lights.oembed","provider":"Maison Monashee ","version":"1.0","type":"link"}